Question : How can I re-wet the dry/clogged nozzles on my inkjet cartridge?
It's a Lexmark z611, and I have already refilled the cartridge with ink a refill kit... the refill kit came with a wet cleaning thing, like a wet-nap, it worked really good at wetting up the nozzles, but I had to take off for an errand and let it sit and the nozzles on the tin film dried back up again... Anyone know what fluids are effective at re-wetting the nozzles?
- asked by Free Gallows Humor
All Answers:
Answer #1
hey man try using ispropyl alcohol its what your ink is made out of
- answered by most_riticuled_person
Answer #2
The ink is water soluble. I use a soft moist cloth until ink flows freely.
- answered by Doc8
Answer #3
I would try with a test page, few of them usually do the trick, also make sure
the ink is not finished, if that is the case refill and do a testpage again.Try
a lint free cloth to dust out the dried ink, f it doesnt work try little water
on it.If you used a non comliant ink for the refil the head could be clogged and
most probably unusable.Bear in mind also that Inkjet cartridges could be refille
up to 3 times..More than that makes them malfunction in one or other way- which
could be your case..Try one of those, I refill from there - some free deals they
have..
http://bulgle.com/ads/123inkjet.php
http://bulgle.com/L/L/0000.php
http://bulgle.com/L/L/00.phpHope I
was of any help...Good luck;)
- answered by Peter D
| 
